90 Gallon Large Portable Ultrasonic Power Cleaner

BRAND NEW Ultrasonic Power Corporation 90 Gallon Heated Portable Ultrasonic Cleaner. This unit retails for $14,000. This unit is completely self contained with wheels for easy portability. This is a professional grade unit used by General Motors, Ford and Snap-On Tools in their production facilities. Please e-mail or call us with any questions or concerns you may have about using this industrial grade cleaner. We also have these available in 33 & 39 gallon configurations.

SPECIFICATIONS:

- Overall dimensions of 26 inches (FtoB) x 60 inches (LtoR) x 40 inches high

- Internal dimensions of 22 inches (FtoB) x 48 inches (LtoR) x 20 inches deep

- Two (2) 40 kHz, 1000 Watt, Model 5300 ultrasonic generators

- 2000 Watts average power (4000 Watts peak)

- Patented constant power circuit design monitors power output continuously

- adjusting input power for controlled consistency.

- Capable of Continuous Operation

- 24 “Vibra-bar” transducers, 48 piezoelectric (PZT) stacks

- “Simultaneous Multi-Frequency” ultrasonic cleaning power

- Two (2) adjustable power intensity controls on the control panel

- 2000 Watts of thermostat controlled heat

- 12 gauge, 316L stainless steel – tank bottom

- Double wall stainless steel construction

- (4) five inch swivel castors

- Meets FCC Requirements

- Power requirement 240 vac, 50/60 Hz, single phase

- Solid State Circuitry

- Adjustable Sweep Rate: 100 to 1000 Hz

- Circuit design protects from shorts or open in output

- AC power cord, 14 feet long, Drain, 1 inch

- One (1) drain valve, ¼ turn ball

- Full Two year Warranty

TANK FEATURES:

- Provides the optimum environment for precision cleaning with extended service life.

- Constructed of cavitation resistant, bright annealed 316L stainless steel.

- Welded inside and out for long-term stability and sturdy performance.

- Double wall construction for maximum sturdiness.

- Sloped bottoms for easy draining.

GENERATOR FEATURES:

This powerful, state-of-the-art generator when applied with "Vibra-Bar" transducers, the 5300 delivers "Simultaneous Multi-Frequency" for both an electrical sweep of the base frequency, and a mechanical multi-frequency movement of the "Vibra-Bar" transducers. Producing uniform cavitation with aqueous as well as semi-aqueous material, this combination provides the most effective cleaning action available in the industry. A sweep frequency circuit which operates at 40 kHz and sweeps 2 kHz above and below the base frequency. The speed of sweep can be adjusted from the range of 100 to 1000 times per second depending on the desire of the end user and the fluid that will be utilized in the tank. The 5300 has the ability to perform in a variety of aqueous and semi-aqueous chemistries. The 5300 has constant output power with less than 5% change in spite of load and/or temperature variations of the liquid volume and product mass being cleaned. And the 5300 solid state circuitry is protected from shorts and opens on the load side.